Jack Ferracane

Professor

  • 14474 Citations
  • 63 h-Index
1981 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Article

3D printed versus conventionally cured provisional crown and bridge dental materials

Tahayeri, A., Morgan, M. C., Fugolin, A. P., Bompolaki, D., Athirasala, A., Pfeifer, C., Ferracane, J. & Bertassoni, L., 2017, (Accepted/In press) In : Dental Materials.

Research output: Contribution to journalArticle

28 Scopus citations

Abrasive wear of resin composites as related to finishing and polishing procedures

Turssi, C. P., Ferracane, J. & Serra, M. C., Jul 2005, In : Dental Materials. 21, 7, p. 641-648 8 p.

Research output: Contribution to journalArticle

84 Scopus citations

Academy of Dental Materials guidance-Resin composites: Part II-Technique sensitivity (handling, polymerization, dimensional changes)

Ferracane, J., Hilton, T. T., Stansbury, J. W., Watts, D. C., Silikas, N., Ilie, N., Heintze, S., Cadenaro, M. & Hickel, R., 2017, (Accepted/In press) In : Dental Materials.

Research output: Contribution to journalArticle

18 Scopus citations

Academy of Dental Materials guidance—Resin composites: Part I—Mechanical properties

Ilie, N., Hilton, T. T., Heintze, S. D., Hickel, R., Watts, D. C., Silikas, N., Stansbury, J. W., Cadenaro, M. & Ferracane, J., Aug 1 2017, In : Dental Materials. 33, 8, p. 880-894 15 p.

Research output: Contribution to journalArticle

37 Scopus citations

A Chemical Approach to Optimizing Bioactive Glass Dental Composites

Aponso, S., Ummadi, J. G., Davis, H., Ferracane, J. & Koley, D., Feb 1 2019, In : Journal of Dental Research. 98, 2, p. 194-199 6 p.

Research output: Contribution to journalArticle

3 Scopus citations

A clinical comparison of two cements for levels of post-operative sensitivity in a practice-based setting

Hilton, T. T., Hilton, D., Randall, R. & Ferracane, J., May 2004, In : Operative Dentistry. 29, 3, p. 241-248 8 p.

Research output: Contribution to journalArticle

8 Scopus citations

A comparative evaluation of polymerization stress data obtained with four different mechanical testing systems

Gonçalves, F., Boaro, L. C., Ferracane, J. & Braga, R. R., Jun 2012, In : Dental Materials. 28, 6, p. 680-686 7 p.

Research output: Contribution to journalArticle

19 Scopus citations

A comparative study between crack analysis and a mechanical test for assessing the polymerization stress of restorative composites

Braga, R. R., Yamamoto, T., Tyler, K., Boaro, L. C., Ferracane, J. & Swain, M. V., Jun 2012, In : Dental Materials. 28, 6, p. 632-641 10 p.

Research output: Contribution to journalArticle

20 Scopus citations

A comparative study of the bond strengths of amalgam and alloy-glass ionomer cores.

Arcoria, C. J., DeWald, J. P., Moody, C. R. & Ferracane, J., May 1989, In : Journal of Oral Rehabilitation. 16, 3, p. 301-307 7 p.

Research output: Contribution to journalArticle

20 Scopus citations

A comparison of four modes of evaluating depth of cure of light-activated composites.

DeWald, J. P. & Ferracane, J., Mar 1987, In : Journal of Dental Research. 66, 3, p. 727-730 4 p.

Research output: Contribution to journalArticle

217 Scopus citations

Acoustic emission analysis of the effect of simulated pulpal pressure and cavity type on the tooth-composite interfacial de-bonding

Kim, R. J. Y., Choi, N. S., Ferracane, J. & Lee, I. B., 2014, In : Dental Materials. 30, 8, p. 876-883 8 p.

Research output: Contribution to journalArticle

10 Scopus citations

Acoustic emission analysis of tooth-composite interfacial debonding

Cho, N. Y., Ferracane, J. & Lee, I. B., Jan 2013, In : Journal of Dental Research. 92, 1, p. 76-81 6 p.

Research output: Contribution to journalArticle

12 Scopus citations

A dentin-derived hydrogel bioink for 3D bioprinting of cell laden scaffolds for regenerative dentistry

Athirasala, A., Tahayeri, A., Thrivikraman, G., Franca, C. M., Monteiro, N., Tran, V., Ferracane, J. & Bertassoni, L., Jan 10 2018, In : Biofabrication. 10, 2, 024101.

Research output: Contribution to journalArticle

21 Scopus citations

Alternative photoinitiator system reduces the rate of stress development without compromising the final properties of the dental composite

Schneider, L. F. J., Consani, S., Sakaguchi, R. & Ferracane, J., May 2009, In : Dental Materials. 25, 5, p. 566-572 7 p.

Research output: Contribution to journalArticle

26 Scopus citations

Alternatives in polymerization contraction stress management

Braga, R. R. & Ferracane, J., 2004, In : Critical Reviews in Oral Biology and Medicine. 15, 3, p. 176-184 9 p.

Research output: Contribution to journalArticle

154 Scopus citations

Amalgam-derived mercury.

Ferracane, J., May 1992, In : General Dentistry. 40, 3, p. 223-229 7 p.

Research output: Contribution to journalArticle

7 Scopus citations

A Novel Strategy to Engineer Pre-Vascularized Full-Length Dental Pulp-like Tissue Constructs

Athirasala, A., Lins, F., Tahayeri, A., Hinds, M., Smith, A. J., Sedgley, C., Ferracane, J. & Bertassoni, L., Dec 1 2017, In : Scientific Reports. 7, 1, 3323.

Research output: Contribution to journalArticle

23 Scopus citations

Antibacterial, ester-free monomers: Polymerization kinetics, mechanical properties, biocompatibility and anti-biofilm activity

Fugolin, A. P., Dobson, A., Huynh, V., Mbiya, W., Navarro, O., Franca, C. M., Logan, M., Merritt, J. L., Ferracane, J. L. & Pfeifer, C. S., Jan 1 2019, (Accepted/In press) In : Acta Biomaterialia.

Research output: Contribution to journalArticle

A pilot study of a simple photon migration model for predicting depth of cure in dental composite

Chen, Y. C., Ferracane, J. & Prahl, S. A., Nov 2005, In : Dental Materials. 21, 11, p. 1075-1086 12 p.

Research output: Contribution to journalArticle

42 Scopus citations

A revised classification for direct tooth-colored restorative materials.

Mount, G. J., Tyas, M. J., Ferracane, J., Nicholson, J. W., Berg, J. H., Simonsen, R. J. & Ngo, H. C., Sep 2009, In : Quintessence international (Berlin, Germany : 1985). 40, 8, p. 691-697 7 p.

Research output: Contribution to journalArticle

22 Scopus citations

As per manufacturer's instructions

Hilton, T. T. & Ferracane, J., 2006, In : Journal of Esthetic and Restorative Dentistry. 18, 1, p. 1-2 2 p.

Research output: Contribution to journalArticle

3 Scopus citations

Assessing the effect of composite formulation on polymerization stress

Condon, J. R. & Ferracane, J., Apr 2000, In : Journal of the American Dental Association. 131, 4, p. 497-503 7 p.

Research output: Contribution to journalArticle

165 Scopus citations

Association between caries location and restorative material treatment provided

Lubisich, E., Hilton, T. T., Ferracane, J., Pashova, H. I. & Burton, B., Apr 2011, In : Journal of Dentistry. 39, 4, p. 302-308 7 p.

Research output: Contribution to journalArticle

14 Scopus citations
4 Scopus citations

Authors' response

Senestraro, S. V., Crowe, J., Vo, A., Covell, D., Ferracane, J., Wang, M. & Huang, G., 2013, In : Journal of the American Dental Association. 144, 12, p. 1334 1 p.

Research output: Contribution to journalArticle

Bioactive glass fillers reduce bacterial penetration into marginal gaps for composite restorations

Khvostenko, D., Hilton, T. T., Ferracane, J., Mitchell, J. C. & Kruzic, J. J., Jan 1 2016, In : Dental Materials. 32, 1, p. 73-81 9 p.

Research output: Contribution to journalArticle

51 Scopus citations

Biofilm formation affects surface properties of novel bioactive glass-containing composites

Hyun, H. K., Salehi, S. & Ferracane, J., Dec 1 2015, In : Dental Materials. 31, 12, p. 1599-1608 10 p.

Research output: Contribution to journalArticle

7 Scopus citations

Biomaterials for Oral Health

Ferracane, J., Pfeifer, C. & Bertassoni, L., 2017, (Accepted/In press) In : Dental Clinics of North America.

Research output: Contribution to journalArticle

1 Scopus citations

Biomimetic dentin desensitizer based on nano-structured bioactive glass

Mitchell, J. C., Musanje, L. & Ferracane, J., Apr 2011, In : Dental Materials. 27, 4, p. 386-393 8 p.

Research output: Contribution to journalArticle

36 Scopus citations

BisGMA/TEGDMA ratio and filler content effects on shrinkage stress

Gonalves, F., Azevedo, C. L. N., Ferracane, J. & Braga, R. R., Jun 2011, In : Dental Materials. 27, 6, p. 520-526 7 p.

Research output: Contribution to journalArticle

88 Scopus citations

Buonocore memorial lecture: Placing dental composites - A stressful experience

Ferracane, J., May 2008, In : Operative Dentistry. 33, 3, p. 247-257 11 p.

Research output: Contribution to journalArticle

149 Scopus citations

Calculation of contraction stresses in dental composites by analysis of crack propagation in the matrix surrounding a cavity

Yamamoto, T., Ferracane, J., Sakaguchi, R. & Swain, M. V., Apr 2009, In : Dental Materials. 25, 4, p. 543-550 8 p.

Research output: Contribution to journalArticle

29 Scopus citations

Can interaction of materials with the dentin-pulp complex contribute to dentin regeneration?

Ferracane, J., Cooper, P. R. & Smith, A. J., Feb 2010, In : Odontology. 98, 1, p. 2-14 13 p.

Research output: Contribution to journalArticle

69 Scopus citations

Carbon-Based Solid-State Calcium Ion-Selective Microelectrode and Scanning Electrochemical Microscopy: A Quantitative Study of pH-Dependent Release of Calcium Ions from Bioactive Glass

Ummadi, J. G., Downs, C. J., Joshi, V. S., Ferracane, J. & Koley, D., Mar 15 2016, In : Analytical Chemistry. 88, 6, p. 3218-3226 9 p.

Research output: Contribution to journalArticle

17 Scopus citations
37 Scopus citations

Challenges for technology transfer of implant dentistry: research and educational issues for the 1990's.

Schnitman, P. A., Ferracane, J. & Rosenstiel, S. F., 1990, In : The Journal of oral implantology. 16, 4, p. 239-240 2 p.

Research output: Contribution to journalArticle

Choice of cement for single-unit crowns: Findings from The National Dental Practice-Based Research Network

National Dental Practice-Based Research Network Collaborative Group, Jan 1 2019, In : Journal of the American Dental Association.

Research output: Contribution to journalArticle

1 Scopus citations

Comparative study of hydroxyapatite and titanium dental implants in dogs

Kohri, M., Cooper, E. P., Ferracane, J. & Waite, D. F., 1990, In : Journal of Oral and Maxillofacial Surgery. 48, 12, p. 1265-1273 9 p.

Research output: Contribution to journalArticle

37 Scopus citations

Comparative study of luting agents with composite resin cores

Moody, C. R., DeWald, J. P. & Ferracane, J., 1989, In : The Journal of prosthetic dentistry. 62, 5, p. 527-529 3 p.

Research output: Contribution to journalArticle

4 Scopus citations

Comparison of at-home and in-office tooth whitening using a novel shade guide

da Costa, J., McPharlin, R., Paravina, R. D. & Ferracane, J., Jul 2010, In : Operative Dentistry. 35, 4, p. 381-388 8 p.

Research output: Contribution to journalArticle

49 Scopus citations

Comparison of CaOH with MTA for direct pulp capping: a PBRN randomized clinical trial.

Hilton, T. T., Ferracane, J., Mancl, L., Northwest Practice-based Research Collaborative in, P. R. C. I. & Evidence-based Dentistry (NWP), D. NWP., Jul 2013, In : Journal of Dental Research. 92, 7 Suppl

Research output: Contribution to journalArticle

108 Scopus citations
11 Scopus citations
54 Scopus citations

Comparison of Push-out Bond Strengths of Resilon with Three Different Sealers

Stiegemeier, D., Baumgartner, J. C. & Ferracane, J., Feb 2010, In : Journal of Endodontics. 36, 2, p. 318-321 4 p.

Research output: Contribution to journalArticle

21 Scopus citations

Comparison of two at-home whitening products of similar peroxide concentration and different delivery methods

da Costa, J., McPharlin, R., Hilton, T. T., Ferracane, J. & Wang, M., Jul 2012, In : Operative Dentistry. 37, 4, p. 333-339 7 p.

Research output: Contribution to journalArticle

27 Scopus citations
13 Scopus citations

Comparison of various resin composite shades and layering technique with a shade guide

da Costa, J., Fox, P. & Ferracane, J., Apr 2010, In : Journal of Esthetic and Restorative Dentistry. 22, 2, p. 114-124 11 p.

Research output: Contribution to journalArticle

11 Scopus citations